Analysed, never recorded
The noise detector reads the microphone stream in real time. No audio is written to disk and none of it leaves the device.
Pre-release · coming soon to the App Store
Water out. Noise measured. Mosquitoes off.
MeaSoundCare turns the speaker you already carry into a precision instrument. Tuned sound waves push water and dust out of the grille, a live meter reads the room in decibels, and pulsed ultrasound keeps mosquitoes at a distance.
Everything runs on your device. Nothing is recorded, nothing is uploaded.
50
Free accounts left
50 of 50
Coming soon
App Store
3
tools in one app
0
bytes uploaded
100%
on-device processing
No
account, no tracking
Before you start
Three things that make it work
The app tells you all of this on the first screen. It matters more than any setting.
-
1
Hold it speaker down
Point the speaker grille towards the floor so gravity helps the droplets out.
-
2
Turn the volume up
The membrane needs the full excursion to shake the water loose.
-
3
Keep it away from your ears
The tones are loud on purpose. Do not hold the phone against your head.
Everything it can do
Four tools, one clean app
Scroll on — each function unfolds with the screen it lives on.
01 Water & dust eject
Tuned sound waves that move the water out
A calibrated low-frequency sweep drives the speaker membrane at full excursion, so droplets are pushed out of the grille instead of sitting in it.
-
Frequency-swept tones
Not one flat beep — a sweep that finds the frequency your speaker moves the most air at.
-
Three output levels
Gentle, Standard and Strong. Lower it the moment the sound distorts or rattles.
-
Guided run
On-screen guidance for how to hold the phone, and a clear finish for every cycle.
-
Honest limits
MeaSoundCare cannot repair liquid damage. If your device was submerged, let it dry and contact support.
Try it here
Sweep preview
165 Hz
A quiet demo in your browser — the real cleaning sweep is stronger and lives in the app.
02 Noise detector
See how loud the room really is
A live sound-level meter with a colour scale from 20 to 120 dB and a plain-language label, so a number turns into something you can act on.
-
Live dB read-out
Updated continuously, with a label such as “Conversation” next to the value.
-
Lowest, highest, peak
The session keeps the quietest and the loudest moment, so you can compare rooms.
-
Reset any time
Start a fresh measurement with one tap, without leaving the screen.
-
An estimate, not a certificate
Use it to compare rooms, not to certify a workplace. Audio is analysed on device and never recorded.
Try it here
Live meter
--dB
20120 dB
--
Lowest
--
Highest
--
Peak
Uses your microphone in the browser, only while you keep it running. Nothing is stored or sent.
03 Mosquito killer
Pulsed ultrasound that drives mosquitoes off
A scanning band between 14.0 kHz and 21.0 kHz with a pulse pattern, instead of the single flat tone every other app plays.
-
Scanning 14.0–21.0 kHz band
The tone moves across the band and pulses, so it does not become background noise.
-
Killer mode
Wider band, twice the scan speed, deeper tremolo and full output.
-
Any duration
15 s, 30 s, 1 min or a custom timer — rounded to whole cycles of the pattern.
-
Warnings you can trust
Children and pets do hear this tone. The app says so, on the screen, every time.
Try it here
Pattern simulator
10:00
14.0 kHz
Duration
Killer mode
Louder and reaches lower — more people and pets will hear it.
Band: 14.0 – 21.0 kHz
A visual simulation of the pulse pattern. No ultrasound is played in your browser.
04 Control & privacy
You decide how hard it drives the speaker
Every parameter that matters is one screen away — and there is no screen anywhere that asks you to sign in.
-
Output level and gain
Gentle, Standard or Strong, with the live output gain shown as a percentage.
-
System volume watch
The app warns you when the system volume is too low for the effect to work.
-
History
Every cleaning run in one list, so you know when you last did it.
-
Nothing leaves your phone
All processing happens on your device. The app records nothing and sends nothing anywhere.
Try it here
Output level
Output gain
72%
The same control you get in the app.
Privacy by construction
There is no server to leak
MeaSoundCare has no accounts, no analytics SDK and no backend. The only personal data we ever hold is the e-mail address you type into the form on this page.
No account, no login
You install the app and use it. There is nothing to register and nothing to forget.
No tracking
No advertising identifiers, no third-party analytics, no profiling.
Pre-release offer
The first 50 subscribers get a free account
MeaSoundCare is finished and heading for the App Store. Subscribe now and, if you are among the first 50, we will send you a code for a free full account on launch day.
- A free full account — no payment details, no trial that quietly turns into a subscription.
- An invitation as soon as the public beta opens.
- One e-mail when the app goes live. That is the whole mailing.
Only 50 free accounts left
Questions
Before you ask
The app is built and in pre-release. We do not publish a date we cannot hold, so subscribers hear the exact release day first — and they hear it before anyone else.
No. MeaSoundCare pushes water and dust out of the speaker grille; it cannot repair liquid damage. If your device was submerged, switch it off, let it dry and contact support or a service centre.
The app drives the speaker inside its normal working range, and you can lower the output level at any time. If you hear rattling or distortion, drop from Strong to Standard or Gentle — that is exactly what the setting is for.
It drives mosquitoes off with a pulsed, scanning ultrasound band, which works far better than the single fixed tone most apps use. It is not an insecticide and no ultrasound affects every species equally — treat it as a deterrent, not a guarantee.
It is an estimate produced from the phone microphone, not a calibrated measurement. Use it to compare one room with another, never to certify a workplace or support a claim.
None. There is no account, no analytics and no backend; audio is analysed on the device and never recorded. The only data we process is the e-mail address you give us on this page.
Subscribe with a working e-mail address. The first 50 confirmed subscribers receive a free full account code in the launch e-mail. The counter on this page shows how many are left.
Get early access
50 / 50 · Free accounts left